Oce TDS800 User Manual page 189

Press the green knob inside the roll holder to release the locking mechanism
4
and remove the core from the holder (see Figure 92).
[92] Remove the core from the holder
You can place the new roll in the groove on the manual feed of the
Note:
printer. See the arrow on picture 91 on page 188.
Press the locking mechanism down and slide the roll holder from the left into
5
the core of the new roll.
Position the roll between the correct format indicators and release the locking
6
mechanism (see Figure 93).
[93] Place a new roll on the holder
Media and supplies 189