Oce TDS800 User Manual page 221

Pull the green bar of the fuser section toward you to open the fuser section.(see
4
Figure 133)
[133] The bar of the fuser section
Take the crank found on the right hand cover of the paper output unit.
5
Insert the crank in the slot and turn to the right. The paper is delivered from the
6
paper output unit.
[134] The crank
If the paper keeps coming, it is not cut and you have to cut it manually.
7
Cut the paper and turn the crank to the right to deliver the paper.
8
Remove the crank and return it to its original position.
9
Pull the handle 1 towards you to open the pre-heater section (see Figure 135 on
10
page 222).
Pull the green handle 2 toward you and release handle 1 (see Figure 135 on
11
page 222).
Problem solving 221