Table of Contents
Advertisement
maintenanCe and
serViCing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
From aCCidental
operation:
slide the on/oFF button (42)
of the grinder to its "oFF"
position and remove the
battery pack (1) before
performing any inspection,
maintenance, or cleaning
procedures.
to preVent serious
injurY From tool
Failure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, maintenance, and
lubrication
1.
beFore eaCH use,
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical
wiring of the adapter, and any other
condition that may affect safe opera-
tion of the Grinder.
2.
aFter use,
of the Grinder with a clean, moist
cloth.
SKU 66876
to preVent
serious injurY
inspect the
clean external surfaces
For technical questions, please call 1-800-444-3353.
3.
Periodically blow dust and grit out
of the motor vents using dry com-
pressed air.
4.
Ni-Cd
BATTERY MUST BE
RECyCLED OR DiSPOSED OF
PROPERLy. Do not short, incinerate
or open battery.
accessory storage and Handling
1.
Handle accessories carefully to pre-
vent dropping or bumping. Do not
use wheels that have been dropped
or bumped.
2.
Store accessories in shelves, racks,
boxes, or drawers. Storage area
must be kept dry, and above freezing.
Any grinding wheels exposed to hu-
midity or freezing temperatures must
not be used.
Page 17
Advertisement
Table of Contents
