Table of Contents
Advertisement
4.
To create a smoother surface, keep
the tool moving over the work sur-
face.
5.
Release the Paddle Trigger to stop
the tool.
6.
Allow the tool to come to a complete
stop before setting it down.
7.
To prevent accidents, turn off the tool
and disconnect its power supply after
use. Clean, then store the tool in-
doors out of children's reach.
MAintenAnce And
SerVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FrOM AccidentAl
OperAtiOn:
turn the power Switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
tO preVent SeriOuS
injurY FrOM tOOl
FAilure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
SKU 65519
tO preVent
SeriOuS injurY
For technical questions, please call 1-800-444-3353.
cleaning, Maintenance, and
lubrication
1.
BeFOre eAch uSe,
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
2.
Periodically blow dust and grit out
of the motor vents using dry com-
pressed air. Always wear safety
glasses when performing this mainte-
nance operation.
3.
AFter uSe,
of the tool with clean cloth. Never use
solvents or harsh cleaners as they
may damage the housing. to pre-
vent electrical shock, do not allow
water or other liquids to enter the
motor vent holes in the gear hous-
ing.
4.
WArning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
inspect the
clean external surfaces
Page 14
Hide quick links:
Advertisement
Table of Contents
