Maintenance - Chicago Electric 94071 Owner's Manual & Safety Instructions

Maintenance and Servicing
procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from
its electrical outlet before performing any procedure in this section.
TO pREVENT SERIOUS INJURy FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. BEFORE EAcH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
Accessory Storage and Handling
1. Handle accessories carefully to prevent
dropping or bumping. Do not use wheels
that have been dropped or bumped.
Page 12
For technical questions, please call 1-888-866-5797.
2. AFTER USE, wipe external surfaces of the tool
with clean cloth. To clean Buffing Wheel, hand
wash and air dry using only mild detergents.
Do not immerse any part of the tool in liquid.
3. If Buffing Wheel has become too hard, use a
stiff wire brush (not included) to fluff it up.
WARNING! If the supply cord of this
4.
power tool is damaged, it must be replaced
only by a qualified service technician.
2. Store accessories in shelves, racks,
boxes, or drawers. Keep storage area
dry and above freezing. Any grinding
wheels exposed to humidity or freezing
temperatures must not be used.
Item 94071