Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
4-1/2"
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17h
Advertisement
Table of Contents
Related Manuals for Chicago Electric 65519
Summary of Contents for Chicago Electric 65519
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
When operating a power tool outdoors, safety alert symbol, is use an extension cord suitable for used to address practices not outdoor use. Use of a cord suitable for related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 65519... - Page 3 Use of the power tool for operations different connected and properly used. Use of from those intended could result in a hazardous situation. Item 65519 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Grinding, Sanding Or Wire Brushing Operation Safety Warnings
11. Position the cord clear of the spinning excessively and may cause loss of control. accessory. If you lose control, the cord may Page 4 For technical questions, please call 1-888-866-5797. Item 65519... -
Page 5: Kickback And Related Warnings
The could cause pacemaker interference or operator can control torque reactions or pacemaker failure. In addition, people with kickback forces, if proper precautions are pacemakers should: taken. Item 65519 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Safety Warnings Specific For Grinding Operations
Wire wheel or brush may wheel. Abrasive cut-off wheels are intended expand in diameter due to work load and centrifugal forces. Page 6 For technical questions, please call 1-888-866-5797. Item 65519... -
Page 7: Vibration Safety
If any abnormal physical symptoms related to vibration (such vibration occurs, stop use immediately. as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 65519 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Double Insulated Tools: Tools With Two Prong Plugs
Protect the extension cords from sharp objects, excessive heat, and damp or wet Double insulated tools may be used in areas. either of the 120 volt outlets shown in the Page 8 For technical questions, please call 1-888-866-5797. Item 65519... -
Page 9: Specifications
120 VAC / 60 Hz / 6 A Motor No Load Speed 10,000 RPM 4-1/2″ Diameter x 1/4″ Wheel Size Thick Spindle Arbor Diameter 5/8″ Spindle Thread 11 TPI 224184 Item 65519 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Instructions For Putting Into Use
The Handle (51) can be installed in three different positions; on top, or on either side of the Gear Box (3). Screw the threaded end of the Handle into the selected position. Tighten securely before beginning work. Page 10 For technical questions, please call 1-888-866-5797. Item 65519... - Page 11 45° from the vertical center line on each side of the wheel and 1 – 2 inches from the edge of the wheel (see Illustration). Item 65519 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Clean, then store the tool indoors out of extra length to allow free movement while children’s reach. working. Secure loose work pieces using a vise or clamps (not included) to prevent movement while working. Page 12 For technical questions, please call 1-888-866-5797. Item 65519...
-
Page 13: Maintenance And Servicing
Use only proper type of material. disc accessory in good condition. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 65519 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Please Read The Following Carefully
Grinding Wheel Spring Outer Flange Locking Button Tapping Screw Tapping Screw Plain Washer Power Cord Clamp Grinding Wheel Clamp Power Cord Bevel Gear Cable Jacket Bearing Handle Armature Pin Wrench Page 14 For technical questions, please call 1-888-866-5797. Item 65519... -
Page 15: Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 65519 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Limited 90-Day Warranty
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797 Page 16 For technical questions, please call 1-888-866-5797. Item 65519...
Need help?
Do you have a question about the 65519 and is the answer not in the manual?
Questions and answers