mAinTEnAnCE AnD
SERViCing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FROm ACCiDEnTAL
OpERATiOn:
Turn the power Switch of the
tool to its "OFF" position and
disconnect the battery before
performing any inspection,
maintenance, or cleaning
procedures.
TO pREVEnT SERiOuS
injuRY FROm TOOL
FAiLuRE:
Do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
SKU 66672
TO pREVEnT
SERiOuS injuRY
For technical questions, please call 1-800-444-3353.
Cleaning, maintenance, and
Lubrication
1.
BEFORE EACH uSE,
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts and any other condition
that may affect its safe operation.
2.
Periodically blow dust and grit out
of the motor vents using dry com-
pressed air.
3.
AFTER uSE,
of the tool with a clean cloth.
4.
WARning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
inspect the
clean external surfaces
Page 16