Assembly - Chicago Electric 66876 Set Up And Operating Instructions Manual

assembly

installing the side Handle
do not operate this tool with
one hand only or without the
side Handle properly
installed.
Gear Box (27)
Figure 3
1. The Side Handle (31) may be in-
stalled on either side of the Gear Box
(27).
2. Thread the Side Handle clockwise
into the selected position.
3. Tighten securely before beginning
work.
SKU 66876
to preVent
serious injurY:
Side Handle (31)
For technical questions, please call 1-800-444-3353.
adjusting the wheel guard
do not operate this tool
without the wheel guard
properly installed and
positioned.
Wheel Guard (16)
1. The Wheel Guard comes installed on
the Grinder. To adjust the placement
of the Wheel Guard:
a. Using the included Hex Wrench,
loosen the Wheel Guard Bolt (20).
b. Rotate the Wheel Guard as needed
for the planned work.
c. Tighten the Wheel Guard Bolt se-
curely.
2. Check the Wheel Guard to ensure it
is firmly in place. Adjust again if nec-
essary before proceeding.
to preVent
serious injurY:
Wheel Guard
Bolt (20)
Figure 4
Page 13