Chicago Electric 67648 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Grinder
  5. 67648
  6. Set up and operating instructions manual

Chicago Electric 67648 Set Up And Operating Instructions Manual

7” angle grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

7" Angle grinder
Set up And OperAting inStructiOnS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVe thiS MAnuAl.
©
Copyright
2010 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
67648
®
. All rights reserved. No portion of this manual or any artwork
(Grinding Wheel Sold Separately)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 67648 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chicago Electric 67648

Summary of Contents for Chicago Electric 67648

  • Page 1 7” Angle grinder Model 67648 Set up And OperAting inStructiOnS (Grinding Wheel Sold Separately) Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury. SAVe thiS MAnuAl. © ®...

  • Page 2: Table Of Contents

    FOr putting intO uSe ........12 ASSeMblY..........13 OperAting inStructiOnS ..14 tOOl Set up ........14 wOrK piece And wOrK AreA Set up ..........15 generAl OperAting inStructiOnS ......... 15 Page 2 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 3: Important Safety Information

    Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an SKU 67648 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 Carrying power be repaired. tools with your finger on the switch or disconnect the plug from the power source and/or the battery pack from Page 4 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 5: Safety Warnings Common For Grinding, Sanding, And Wirebrushing Operations

    Failure to follow all SKU 67648 For technical questions, please call 1-800-444-3353. Page 5...
  • Page 6 Turn off the tool, and unplug it from its accessory. If you lose control, the cord electrical outlet before leaving. may be cut or snagged and your hand Page 6 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 7: Kickback And Related Warnings

    State of California kickback or torque reaction during to cause cancer, and birth defects or start-up. The operator can control SKU 67648 For technical questions, please call 1-800-444-3353. Page 7...

  • Page 8: Safety Warnings Specific For Grinding Operations

    Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Page 8 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 9: Safety Warnings Specific For Sanding Operations

    Raynaud’s Disease should SKU 67648 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Grounded Tools: Tools With Three Prong Plugs

    The smaller the gauge number of the should look like those in the preceding wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry Page 10 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 11: Symbology

    5.1 – 7.0 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 * based on limiting the line tAble A voltage drop to five volts at 150% of the rated amperes. SKU 67648 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: Specifications

    Button (21) Lock-on Grinding Wheel Carbon Brush Switch (46) (Sold Separately) Cap (41) Handle Trigger (43) (47) Wheel Guard (3) Hex Wrench (55) Spanner (53) Figure 1 Auxiliary Handle (23) Page 12 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 13: Assembly

    Use the Hex Wrench (55) to tighten the Socket Head Bolt securely. Check the Wheel Guard to ensure it is firmly in place. Adjust if necessary before proceeding. SKU 67648 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Operating Instructions

    Slip the grinding wheel by the ring-test explained following. onto the Spindle with the gasket first. The gasket should be centered on the grinding wheel and the wheel and gasket Page 14 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 15: Work Piece And Work Area Set Up

    This may cause damage to the Before beginning work, provide for motor and reduce the efficiency of the sparks and debris that will fly off the work tool. surface. SKU 67648 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Maintenance And Servicing

    NIOSH-approved breathing protection when performing this maintenance operation. AFter uSe, wipe external surfaces of the tool with a clean cloth. Do not use solvents or harsh cleaners as they Page 16 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 17: Carbon Brush (40) Replacement

    When installing the carbon brushes, make sure the carbon portions of the carbon brushes contact the motor armature and that the springs operate freely. SKU 67648 For technical questions, please call 1-800-444-3353. Page 17...

  • Page 18: Troubleshooting

    Use only proper type of disc accessory in good condition. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect power supply before service. Page 18 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 19: Parts List

    Tapping Screw ST5 x 45C Tapping Screw ST4 x 14F Spindle Lock Button Cord Sleeve Spindle Lock Spring Cord Auxiliary Handle Spanner Heck Nut M8 Rubber Cap Pinion Hex Wrench Ball Bearing 6201.2RS SKU 67648 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Assembly Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 20 For technical questions, please call 1-800-444-3353. SKU 67648...

  • Page 21: Limited 90 Day Warranty

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 67648 For technical questions, please call 1-800-444-3353. Page 21...

Table of Contents