Life Gear 97780 Owner's Manual page 15

COMPUTER BUTTON FUNCTIONS:
ON/OFF: Press the ON/OFF button to start or stop training on different training mode.
MODE: Press the MODE button to select pre-set programs P1 to P25.
CLEAR/SET: Press the CLEAR/SET button to select function of TIME, DISTANCE, or
CALORIES for target pre-setting in Program 0.
Press the CLEAR/SET button to exit P1-P25 program mode.
Press the CLEAR/SET button to clear up the record.
SPEED UP: Press the SPEED UP button to make upward for speed adjustment on
different training mode.
Press the SPEED UP button to pre-set function values of TIME, DISTANCE, or
CALORIES for target pre-setting in Program 0.
SPEED DOWN: Press the SPEED DOWN button to make downward for speed adjustment
on different training mode.
Press the SPEED DOWN button to pre-set function values of TIME, DISTANCE, or
CALORIES for target pre-setting in Program 0.
INCLINE UP: Press the INCLINE UP button to increase the incline level.
INCLINE DOWN: Press the INCLINE DOWN button to decrease the incline level.
INSTANT SPEED (3 km / 6 km / 9 km): Press one of the INSTANT SPEED buttons
(3 / 6 / 9) on the computer console, the SPEED on the LCD window will display the speed
that you are pressed and the running speed will change to 3 KPH, 6 KPH, or 9 KPH
immediately.
INSTANT INCLINE (3 / 6 / 9): Press one of the INSTANT INCLINE buttons (3 / 6 / 9) on
the computer console, the INCLINE on the LCD window will display the incline level that
you are pressed and the incline will change to 3-level, 6-level, or 9-level immediately.
COMPUTER DISPLAY:
TIME: Press the ON/OFF button to start exercise, the LCD window will countdown 3
seconds with the LCD showing "3-2-1" before the running belt starts moving. The running
belt starts moving with an initial speed of 1.0 KPH. You may press the SPEED UP or
SPEED DOWN button on the computer console or handlebar to increase or decrease the
running speed during exercise. You may also press INCLINE UP or INCLINE DOWN
button on the computer console or handlebar to increase or decrease the incline level
during exercise. The TIME on the LCD window will display your elapsed workout time in
minutes and seconds. You may also pre-set target time before training in Program 0.
Press the CLEAR/SET button to select TIME function, the TIME on the LCD window will
begin blinking for pre-setting target training time. The initial pre-set target time is 30:00
minutes, you may press the SPEED UP or SPEED DOWN button to pre-set target time.
Each increment is 1 minute. The pre-set target time range is from 5:00 to 99:00 minutes.
Press the ON/OFF button to start exercise. The running belt starts moving with an initial
14