Handset Jack - Alcatel MDR-8000 User Manual

See Figure 3-16. There are eight connectors on the backplane to interface with three of the
service channels. The connectors on the backplane interface three functions: audio, RS-
232, and MCS-11. Each service channel is provisioned for a specific function. As shown by
the vertical line connecting to the three functions on one side and the three service chan-
nels (SC1, SC2, and SC3) on the opposite side, audio and MCS can be put on any open ser-
vice channel. RS-232 data can be put on service channel 1 or 2 but cannot be put on service
channel 3. This is shown by the dashed lines to the specific service channel.

Handset Jack

3.15.1
The 2-wire port at the TEL connector on AE-37Y Controller accepts either the optional
handset or a standard telephone. The 2-wire port is not provisionable. To use the handset,
the radio must be provisioned for Audio 1.
J316
TELEPHONE
(4-WIRE)
J317
J307, J310
(BRIDGED)
TSM–2500
J315, J318
(BRIDGED)
ELMC
J312
RS232–1
LAPTOP
J313
RS232–2
Figure 3 - 16 Service Channel Connections/Applications
RADIO
AUDIO
1
CONTROLLER
SC1
AUDIO
2
SC
MULDEM
SC2
OVERHEAD
CHANNELS
MCS
SC3
TEL
SC0
HANDSET
(2-WIRE)
RADIO
AUDIO
1
CONTROLLER
SC1
AUDIO
2
SC
MULDEM
SC2
J307, J310
(BRIDGED)
OVERHEAD
CHANNELS
MCS
SC3
TEL
J315, J318
(BRIDGED)
SC0
RS232–1
RS232–2
J316
TELEPHONE
(4-WIRE)
J317
TSM–2500
ELMC
J312
LAPTOP
J313
LMW-3138
04/21/04
3-23