Alcatel MDR-8000 User Manual page 242

MCS-11 Master (J307) Cable Connection
A.2.11.1
If the radio is provisioned
nects to J307, is disabled. At a repeater, you can use J310 in lieu of
J307 for connecting the TSM polling engine to the radio.
MCS-11 connector J307 is used to connect to a TSM (-2500, -3500, or -8000) polling engine
at a master terminal.
Recommended connectorized cable assembly – PN 695-4126-007/009/012 (26 AWG 8 pair
shielded, jacketed cable). See Figure A - 13 for shelf connector location and pinout.
J315 J1
J318 J307 J307
J316 J308
J317 J309
J312 J312 J310
Figure A - 13 MCS-11 Connector J307 Location and Pinout
A-22
Note
Repeater , port 2 on the controller, that con-
J307
8 1
15 9
FRONT VIEW
J301 J301
XMT DATA +
RTN CLK +
XMT CLK +
RCV DATA +
RCV CLK +
RCV CLK -
RCV DATA -
XMT CLK -
RTN CLK -
XMT DATA -
LMW-7218
01/21/04