Optional Test Equipment - Alcatel MDR-8000 User Manual

OPTIONAL TEST EQUIPMENT

5.3
Refer to Table 5 - 2 for a list of optional test equipment to support alternate test procedures
in this section and the over-the-hop test procedure in Appendix E on the attached CD.
Test Equipment/Function
Attenuator
Narda 768-30
Bit Error Rate Test Set
Acterna ANT-5
Data Rate
Modulation Scheme
Communications Analyzer w/DS1
Acterna 2310-P4 or Acterna TB 310
DS1 Data Rate
DS1 Modulation Scheme
DS3 Data Rate
DS3 Modulation Scheme
Optical Power Meter
RIFOCS 555B With SC and FC SOC
Power
Wavelength
Optical Receiver
Acterna T-Berd 310-14R-SC Optical
Transmitter
Acterna T-Berd 310-14T-SC
Data Rate
Oscilloscope, Tektronix TDS3052B
Power Meter,
Agilent E4418A with E9300A Power
Sensor
Spectrum Analyzer, Agilent E4408B
Variable Attenuator, Narda 791
5-2
Table 5 - 2 Optional Equipment
Essential
Characteristics
30 dB, 50 Ohms,
20 Watts
2.048 Mb/s,
HDB3
1.544 Mb/s,
B8ZS or AMI
44.736 Mb/s
64 QAM
--8 to -28 dBM,
1310/1550 nm
155.52 Mb/s
-60 to +20 dBm,
10 MHz to 18
GHz, 50 ohms
1.7 to 11.7 GHz
1.7 to 11.7 GHz, 0
to 37.5 dB
Used On
Para. 5.23 PA Output Level Calibration
(Alternate Procedure)
Appendix E Chart 3, Over-The-Hop
DS1/E1 BER Threshold Test
Appendix E Chart 4 Over-The-Hop DS3
BER Threshold Test
Appendix E Chart 2 Over-The-Hop
OC3/STM-1 Optical Power Test
Appendix E Chart 5 Over-The-Hop
OC3/STM-1 BER Threshold Test
Para. 5.10 DS3 Radio DADE
Para. 5.11 DS3 Line DADE
Para. 5.15, XMTR Output Level Check
(No PA)
Appendix E Chart 1, Over-The-Hop
XMTR Output Power and RCVR RSL
Para. 5.16 and Para. 5.17, XMTR Car-
rier Null Adjustment Using Spectrum
Analyzer
Appendix E Chart 3, Over-The-Hop
DS1/E1 BER Threshold Test
Appendix E Chart 4, Over-The-Hop DS3
BER Threshold Test
Appendix E Chart 5, Over-The-Hop
OC3/STM-1 BER Threshold Test