CAPACITY UPGRADE DS1 TO DS3 OR DS3 TO OC3
A.5
Upgrading a DS1 radio to DS3 or DS3 radio to OC3 requires changing straps on the LBO
adaptor, located behind the I/O interface module. Use the following procedure before start-
ing upgrade from DS3 to OC3.
1. PULL OC3 AUX INTFC BOARD
OUT OF CARDCAGE UNTIL
EDGE OF MODULE IS RESTING
ON EDGE OF CARDCAGE.
3. UNLOCK AND DISCONNECT
RPTR CABLE.
2. DISCONNECT
WAYSIDE DS1
CABLES.
MDR-1007
03/09/04
A-37