Alcatel MDR-8000 User Manual page 252

Check to ensure that the three mounting screws securing the PA to
the heatsink are loose before attempting to remove the PA to
prevent damage to the module.
LEFT
BRACKET
5. PULL STRAIGHT OUT ON
PA UNTIL CHASSIS COVER
MEETS LEFT BRACKET ON
CARD CAGE.
A-32
WARNING
Possibility of
Damage
to Equipment
4. LOOSEN THREE CAPTIVE MOUNTING
SCREWS SECURING PA TO HEAT SINK.
3. REMOVE PA FRONT PANEL AND
PLACE OUT OF THE WAY.
6. ANGLE PA TO LEFT AND
PULL OUT ON RIGHT SIDE
OF PA UNTIL LEFT SIDE OF
CHASSIS COVER CLEARS
BRACKET.
2. DISCONNECT
CABLE FROM RF
OUT CONNECTOR
ON XMTR.
MDR-1002
03/08/04