Alcatel MDR-8000 User Manual page 186

Remove:
a Remove transmitter from
card cage.
b Remove 13 screws
from Capacity Key and
remove Capacity Key.
Install:
c Install Capacity Key on
three connectors.
d Install 13 screws.
Figure 5 - 16 XMTR Capacity Key Removal/Installation
5-38
CAUTION
Possibility of
Service
Interruption
This is an out-of-service procedure when on a
nonstandby (unprotected) system. On a hot-
standby or frequency diversity system, switch
traffic on the channel under test to protect.
XMTR-RIGHT SIDE VIEW
LMW-6016-SM
09/08/05