INTERCONNECT
B.2
DC power cable length is dependent on PA output, battery voltage, and
distance from the outdoor enclosure to station ground. Determine power
requirements and power cable length before starting installation.
Except for physical routing of the cables, interconnecting the CommPak outdoor unit is the
same as interconnecting the CommPak indoor shelf. Refer to Appendix A for details. All
cables enter the outdoor enclosure through the conduit access plate. Power and signal
cables must be run through separate conduits. Refer to drawing 3EM14247001EJZZA in
diagrams section on attached CD for further details.
MAINTENANCE
B.3
Maintenance for the CommPak outdoor unit is the same as maintenance for the CommPak
indoor shelf. Refer to Appendix A for details.
B-4
Note