Changing Lan Ipv4 Address - D-Link DIR-806A User Manual

DIR-806A AC750 Wi-Fi Router
User Manual

Changing LAN IPv4 Address

This configuration step is available for the Access point, Repeater, and Client modes.
1. Select the Automatic obtainment of IPv4 address to let DIR-806A automatically
obtain the LAN IPv4 address.
2. In the Hostname field, you should specify a domain name of the router using which you
can access the web-based interface after finishing the Wizard. Enter a new domain name of
the router ending with .local or leave the value suggested by the router.
!
I n order to access the web-based interface using the domain name, i n the address bar of the
web browser, enter the name of the router with a dot at the end.
If you want to manually assign the LAN IPv4 address for DIR-806A, do not select the Automatic
obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, Hostname
fields and, if needed, the Gateway IP address field. Make sure that the assigned address does not
coincide with the LAN IPv4 address of the router to which your device connects.
3. Click the NEXT button to continue or click the BACK button to return to the previous page.
Figure 38. The page for
Page 45 of 197
Configuring via Web-based Interface
changing the LAN IPv4 address.