Creating Static Ip Or Dynamic Ip Wan Connection - D-Link DIR-320 User Manual

DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

Creating Static IP or Dynamic IP WAN Connection

To create a connection of the Static IP or Dynamic IP type, click the Add button on the Net / WAN
page. On the opened page, select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 77. The page for creating a new Static IP connection. The General settings section.
Parameter
Provider
Interface
Name
Enable
Direction
General settings
Leave the Manually value.
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 97 of 220
Configuring via Web-based Interface
Description