Wi-Fi Protected Setup Wizard - D-Link DIR-822 User Manual

Section 3 - Configuration
Wireless Settings: Wi-Fi Protected Setup Wizard
If your Wireless Clients support the WPS connection method, this Wi-Fi
Protected Setup Wizard can be used to initiate a wireless connection
between this device and Wireless clients with a simple click of the WPS
button. The Wi-Fi Protected Setup Wizard is specially designed to assist basic
network users with a simple, step-by-step set of instructions to connect
wireless clients to this router using the WPS method.
To initiate the Wi-Fi Protected Setup Wizard click on the Add Wireless Device
with WPS button.
Step 1: In this step the user have two options to choose from. You can
choose Auto if the wireless client supports WPS, or Manual if the wireless
client does not support WPS.
Click on the Prev button to return to the previous page. Click on the Next
button to continue to the next page. Click on the Cancel button to discard
the changes made and return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are two
ways to add a wireless device, that supports WPS. Firstly, there is the Per-
sonal Identification Number (PIN) method. Using this method will prompt
the user to enter a PIN code. This PIN code should be identical on the wire-
less client. Secondly, there is the Push Button Configuration (PBC) method.
Using this method will allow the wireless client to connect to this device by
similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the Next
button to continue to the next page. Click on the Cancel button to discard
the changes made and return to the main wireless page.
D-Link DIR-822 User Manual

Wi-Fi Protected Setup Wizard

41