System Admin - System - D-Link DIR-2055 User Manual

Section 3 - Configuration
In the Management menu on the bar at the top of the page, click System Admin to access the Admin page, then click
System. This page allows you to save the router's current configuration, load a previously saved configuration, reset the
router to its factory default settings, or reboot the router.
To configure the Admin settings, click the Admin link. Refer to System Admin - Admin on page 92
Click Save at any time to save the changes you have made on this page.
Save Settings to Local This option will save the current router configuration settings
Hard Drive to a file on your computer.
Load Settings from This option will load a previously saved router configuration
Local Hard Drive file. This will overwrite the router's current configuration.
Restore to Factory This option will restore the router back to the default
Default Settings configurations stored in the firmware. Any settings that have
not been saved will be lost, including any rules that you have
created. If you want to save the current router configuration
settings, use the Save Settings To Local Hard Drive button
above.
Auto Reboot Configuration
Reboot the Device Click to reboot the router immediately.
Auto Reboot You may set the router to automatically reboot at a set time.
The options are Never, Daily, or Weekly. You may set the
hour, the minute, and the day you wish to have the router
automatically reboot at.
D-Link DIR-2055 User Manual

System Admin - System

System
93