Creating Wimax Wan Connection - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual

Creating WiMAX WAN Connection

You can create a connection of this type only when a WiMAX USB modem is connected to the
router. Select the WAN connection on the Net / Connections page. On the opened page, select
the USB-WIMAX value from the Physical interface drop-down list and specify the needed
values.
Figure 21. The page for creating a new connection. The General settings and Physical layer sections.
Parameter
Name
Connection Type
Enable
Direction
MTU
MAC
General settings
A name for connection for easier identification.
Select the IPoE value.
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
The maximum size of units transmitted by the interface.
A . By default, the MAC address of your WiMAX USB modem is
specified in the field.
Page 30 of 107
Configuring via Web-based Interface
Description