Pin - D-Link DIR-815 User Manual

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual

PIN

On the USB Modem / PIN page, you can change the PIN code of the SIM card inserted into your
USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are unavailable for some models of USB modems.
The current state of the SIM card inserted into your USB modem is displayed in the Status field. If
the PIN code is entered incorrectly or the PIN code is not entered when the PIN code check is
enabled, the Device is locked value is displayed in the Status field. If the PIN code is entered
correctly or the PIN check is disabled, the Device is unlocked value is displayed in the Status
field.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the Yes
value is displayed in the PIN code request field. If the PIN check is disabled, the No value is
displayed in the PIN code request field.
To disable the PIN code check, in the PIN Code Request section, enter the current PIN code in
the PIN code field and click the DISABLE button (the button is displayed if the PIN code check is
enabled).
To enable the PIN code check, in the PIN Code Request section, enter the PIN code used before
disabling the check in the PIN code field and click the ENABLE button (the button is displayed if
the PIN code check is disabled).
To change the PIN code, in the Changing PIN Code section, enter the current code in the PIN
code field, then enter a new code in the New PIN code and New PIN code confirmation
fields and click the SAVE button.
Figure 132. The USB Modem / PIN page.
Page 171 of 240
Configuring via Web-based Interface