Installing Expansion Cards - DFI 586STE User Manual

Warning:
Do not run FDISK and FORMAT programs on a drive that has already
been formatted or you will lose all programs and data stored on the
drive.
Using 586STE with CD-ROM Drives
Important:
If you encountered problems while using an ATAPI CD-ROM drive that
is set in Master mode, please set the CD-ROM drive to Slave mode.
Some ATAPI CD-ROMs may not be recognized and cannot be used if
incorrectly set in Master mode.

Installing Expansion Cards

The 586STE system board is equipped with 3 dedicated PCI slots, 2
dedicated 16-bit ISA slots and 1 shared PCI/ISA slot. All PCI slots are
bus masters. Refer to page 12 for the locations of the expansion slots.
30