Table of Contents
Advertisement
Video
This category selects the type of video adapter used for the primary
system monitor. Although secondary monitors are supported, you do not
have to select the type in Setup. The default setting is EGA/VGA (BIOS
default, Setup default).
Enhanced Graphics Adapter/Video Graphics Array. For EGA,
EGA/VGA
VGA, SVGA and PGA monitor adapters.
Color Graphics Adapter. Power up in 40-column mode.
CGA 40
Color Graphics Adapter. Power up in 80-column mode.
CGA 80
Monochrome adapter. Includes high resolution monochrome
Mono
adapters.
Halt On
This category determines whether the system will stop if an error is de-
tected during power up. The default setting is All Errors (Fail-Safe de-
fault, Optimal default).
No Errors
The system boot will not stop for any errors detected.
All Errors
The system boot will stop whenever the BIOS detects a non-
fatal error.
All, But
The system boot will not stop for a keyboard error; it will stop
Keyboard
for all other errors.
All, But
The system boot will not stop for a disk error; it will stop for
Diskette
all other errors.
All, But
The system boot will not stop for a disk or keyboard error; it
Disk/Key
will stop for all other errors.
Memory
The base memory size, extended memory size and the other memory
size cannot be altered; your computer automatically detects and dis-
plays them.
35
Advertisement
Table of Contents
