Table of Contents
Advertisement
To delete or disable the password function, highlight " Supervisor Pass-
word" and press <Enter>, instead of typing in a new password. Press
the <Esc> key to return to the main menu.
User Password
If you want another user to have access only to your system but not to
setup, set a user' s password with the " System" option selected in the
BIOS Features Setup.
If you want a user to enter a password when trying to access setup, set
a user' s password with the " Setup" option selected in the BIOS Fea-
tures Setup. Using a user' s password to enter Setup allows a user to
access only the " User Password" option that appears on the main
screen. Access to all other options is denied.
To set, confirm, verify, disable or delete a user' s password, follow the
procedures described in the section " Supervisor Password" .
IDE HDD Auto Detection
This option detects the hard disk parameters for the hard disk drives
installed in your system. Highlight this option and press <Enter>. A
screen similar to the one on the next page will appear.
HARD DISKS
Primary Master:
OPTIONS
2 (Y)
1
3
Note: Some OS (like SCO-UNIX) must be "NORMAL" for installation
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
TYPE SIZE CYLS HEAD RECOMP LANDZ SECTOR MODE
Select Primary Master Option (N=Skip): N
SIZE CYLS HEAD
RECOMP LANDZ SECTOR
853
827
32
0
853
1654
16
65535
853
827
32
65536
ESC: Skip
MODE
1653
63
LBA
1653
63
Normal
1653
63
Large
49
Advertisement
Table of Contents
