Table of Contents
Advertisement
HDD Low Level Format
The HDD Low Level Format utility is designed as a tool to save you
time formatting your hard disk. It automatically looks for the necessary
information of the drive you selected. This utility also searches for bad
tracks and lists them for your reference. Highlight this option and press
<Enter>. A screen similar to the one below will appear.
Hard Disk Low Level Format Utility
DRIVE: C CYLINDER: 0
SIZE
Primary Master:
853
Primary Slave:
Secondary Master:
Secondary Slave:
Up/Down-Select item
Copyright (C) Award Software, Inc. 1992-94 All Rights Reserved
Warning:
Do not use this HDD Low Level Format feature for IDE hard drives.
They already have been low-level formatted at the factory. Do a high-
level format only for those drives. Refer to the manual that comes with
your operating system.
Save & Exit Setup
When all the changes have been made, highlight " Save & Exit Setup"
and press <Enter>. The message below will appear:
Save to CMOS and Exit (Y/N)? N
Type " Y" and press <Enter>. The modifications you have made will be
written into the CMOS memory, and the system will reboot. You will
once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc> simul-
taneously or <Del> after memory testing is done.
52
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
SELECT DRIVE
BAD TRACK LIST
PREFORMED
Current select drive is : C
HEAD: 0
HEAD
LANDZ
CYLS
RECOMP
1654
16
65536
0
0
0
0
0
0
0
0
0
0
0
0
ENTER-Accept
No. CYLS HEAD
SECTOR
MODE
1653
63
AUTO
0
0
AUTO
0
0
AUTO
0
0
AUTO
ESC-Exit/Abort
Advertisement
Table of Contents
