Table of Contents
Advertisement
Onboard Parallel Port
Selects the I/O address and IRQ for the onboard parallel port.
378H/IRQ7
3BCH/IRQ7
278H/IRQ5
Disables the onboard parallel port.
Disabled
Parallel Port Mode
SPP
Selects the parallel port mode according to the type of printer
EPP
device connected to your onboard parallel port.
ECP
EPP/ECP
Supervisor Password
If you want to protect your system and setup from unauthorized entry,
set a supervisor' s password with the " System" option selected in the
BIOS Features Setup.
If you want to protect access to setup only, but not your system, set a
supervisor' s password with the " Setup" option selected in the BIOS Fea-
tures Setup. You will not be prompted for a password when you cold
boot the system.
Use the arrow keys to highlight the " Supervisor Password" option and
press <Enter>. The message below will appear.
Type in the password. You are limited to eight characters. When done,
the message below will appear:
You are being asked to verify the password. Type in exactly the same
password. If you type in a wrong password, you will be prompted to
enter the correct password again.
48
Enter Password:
Confirm Password:
Advertisement
Table of Contents
