Power Management Setup - DFI 586STE User Manual

Power Management Setup

Power Management Setup allows you to configure your system to most
effectively save energy.
Power Management
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
** PM Timers **
HDD Off After
Doze Mode
Standby Mode
Suspend Mode
** PM Events **
COM Ports Activity
LPT Ports Activity
HDD Ports Activity
VGA Activity
Power Management
This category allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before each of the
following modes are activated: Doze Mode, Standby Mode, and Sus-
pend Mode.
No power management. Disables the Doze, Standby and
Disable
Suspend modes.
(default)
Minimum power management. Doze Mode = 40 min., Standby
Min. Power
Mode = 40 min., and Suspend Mode = 40 min.
Saving
Maximum power management. Doze Mode = 20 sec., Standby
Max. Power
Mode = 20 sec., and Suspend Mode = 20 sec.
Saving
Allows you to set each mode individually. When enabled, each
User
option ranges from 20 sec. to 40 min.
Defined
ROM PCI/ISA BIOS(2A5IHD4A)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: User Define IRQ3 (COM 2)
: Yes IRQ4 (COM 1)
: Suspend -> Off IRQ5 (LPT 2)
: V/H SYNC+Blank
IRQ6 (Floppy Disk)
: 3 IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
: Disable IRQ10(Reserved)
: Disable IRQ11(Reserved)
: Disable
IRQ12 (PS/2 Mouse)
: Disable IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
: Enabled
: Disabled
: Disabled ESC :Quit
: Disabled
F1 :Help
F5
:Old Values
F6 :Load Fail-Safe Settings
F7 :Load Optimal Settings
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Disabled
↑ ↓ → ←
:Select Item
:Modify
PU/PD/+/-
:Color
(Shift) F2
41