Chapter 5.2: Time And Date Setting - Eurotech Winner Series User Manual

Imitation Processing the ring back will begin automatically at the end of the alerting
timer.
7. If you have more than one Winner Series BRI Gateway on site, enter the address of
each Winner Series BRI Gateway unit in System Identification Number.
This entry can accept number between 1 and 9 digits.
8. If you have sub-addresses of Winner Series BRI Gateway, enter the sub address of
each Winner Series BRI Gateway unit in the second box, 1 digit.
9. In the Type of Number box, select the Type of Number (TON) of calls, from the
ISDN card to the switching unit, as defined in the switching unit.
10. The Numbering scheme protocol, from the ISDN card to the switching unit, is set at
Number Plan Identification (NPI). Set this parameter as defined in the switching unit.
11. Press Write ISDN Setting to send the ISDN settings to the Dual Cell unit.
Note:
The following field boxes in this window are only displaying the existing settings
System version: this box displays the Version of the master card Firmware.
ISM version: this box displays the version of the ISM Firmware.
Country Code: this box displays the default country code setting –
EuroISDN.
ISDN version: this box displays the default ISDN version – EuroISDN.

Chapter 5.2: Time and Date setting

At the bottom part of the ISDN window set the date and time. Then press Set System Time
to send the settings to the Winner Series BRI Gateway
24/34