Chapter 4.2: Define Type Of Dialed Numbers Dispatch Mode - Eurotech Winner Series User Manual

Chapter 4.2: Define Type of Dialed Numbers Dispatch Mode

You can define manual or automatic dispatch. Select the mode in which telephone numbers
are dispatched to the GSM network.
To dispatch phone numbers manually, in the Send Complete list, select HASH.
In this mode, after you dialed all digits of a phone number, press
phone number.
To dispatch phone numbers automatically, in the send complete list, select OMIT.
Then set three additional parameters:
a) Define the length of phone numbers that will be dialed from the port (within a
range).
i) In the Min. Digits box, enter the number of digits of the shortest phone number
that will be dialed from this port.
ii) In the Max. Digits box, enter the number of digits of the longest phone
number that will be dialed from this port
b) Define the Inter Digit Pause. This parameter defines a waiting time, after a digit is
pressed, before the number is automatically dispatched to the GSM network.
i) If this parameter is set too low, then incomplete phone numbers may be
dispatched if the user pauses briefly while dialing.
ii) If this parameter is set too high, then users would have to wait a long time
before a number is dispatched.
The inter digit pause is activated after the minimum number of digits have been
dialed. In many situations, two or three seconds may be appropriate for this
parameter. Each unit of this parameter is 50 milliseconds.
For example, to set an inter digit pause of 3 seconds, enter a value of 60 in this
box (60 * 50 milliseconds = 3,000 milliseconds = 3 seconds).
When a port is set to auto-dispatch phone numbers, the number is dispatched automatically
after the user has dialed the maximum number of digits, or, when an inter digit pause has
occurred.
to send the
18/34