Operating The Vp-747; Operating Via The Osd Menu Screen; Preview And Program Setting Commands; Figure 10: Menu Screen Icons - Kramer VP-747 User Manual

9

Operating the VP-747

You can operate the VP-747 via the:
• OSD Menu, see
• LCD Display, see
• Infrared Remote Control Transmitter, see
• ETHERNET/RS-232, see

9.1 Operating via the OSD MENU Screen

The OSD superimposes a menu on the Preview screen from which you can
control your VP-747. When the OSD front panel button is on, pressing the
MENU button on the front panel or the Menu key on the infrared remote
control transmitter displays the first OSD screen
screen. If the OSD is off, pressing the MENU button on the front panel or the
Menu key on the infrared remote control transmitter will not display the
"Menu screen". In this case, you can navigate via the front panel LCD.
Figure 10 defines the six interactive icons:
9.1.1

Preview and Program Setting Commands

Figure 11 and

Figure 11: Preview and Program Setting OSD Menus

1 Or the last used OSD screen
Operating the VP-747
Section 9.1
Section 9.2
Section 9.4

Figure 10: Menu Screen Icons

Table 5 define the Preview and Program Setting commands:
Section 9.3
1
, the "Preview Setting"
25