Table of Contents
Advertisement
Operating the VP-16x18AK Locally via the Front Panel Buttons
7
Operating the VP-16x18AK Locally via the Front Panel
Buttons
7.1
The Status Display
For a few seconds after being powered on, the unit's model, machine
number and firmware version are displayed on the Status display.
KRAMER VP-1618AK
MACH.NUM.01
After a few seconds, the display shows which audio
switched to which output, for example, output 1 is switched to input 1,
output 4 is switched to input 11 and output 15 is switched to input 3, as
shown below.
01
10
7.2
Switching Inputs to Outputs
To switch a video/audio input to an output:
1. Press the VIDEO button to select video channels or AUDIO to select
audio channels.
The VIDEO/AUDIO button lights red.
2. Press the required OUTPUT button.
The selected output on the Status display flashes.
3. Press the required INPUT button.
After a few seconds the output on the Status display stops flashing and
the switch is implemented.
To connect a video/audio input to all outputs:
• Press the ALL button followed by the INPUT button corresponding
to the input that is to be routed to all the outputs
To disconnect a video/audio input from a specific output:
• Press the required OUTPUT button followed by the OFF button.
To disconnect all outputs:
• Press the ALL button, followed by the OFF button
1 When the Audio button is lit the audio switching is selected
2 When the Video button is lit the video switching is selected
FW.VERS.5645
02
03
11
11
12
13
05
06
07
14
03
16
1
2
or video
input is
08
09
17
18
19
Advertisement
Table of Contents
