Operating the VP-4x8 4x8 VGA / UXGA Matrix Switcher
7
Operating the VP-4x8 4x8 VGA / UXGA Matrix Switcher
You can operate your VP-4x8 via:
The front panel buttons
RS-232/RS-485 serial commands transmitted by a touch screen
system, PC, or other serial controller
The Kramer RC-IR Infrared Remote Control Transmitter
The Ethernet
7.1
Displaying Unit Characteristics
The STATUS 7-segment display shows three sets of information, as defined
in Table 7:
The STATUS Display
1 The " First Display" appears initially, followed a few seconds later by the " Second Display" , then the " Third Display"
18
Table 7: STATUS 7-segment Display
Shows:
Device type:
VP-4x8
Unit characteristics:
Firmware version
Machine number
Normal display:
Inputs switched to the
outputs
KRAMER: SIMPLE CREATIVE TECHNOLOGY
When:
Immediately (and
automatically) after
switching on the power
Immediately (and
automatically) after
switching on the power
During normal operation,
appears a few seconds
1
after the first display