Table of Contents
Advertisement
8
Operating the VP-747
You can operate the VP-747 via the:
•
OSD Menu, see
•
LCD Display, see
•
Infrared Remote Control Transmitter, see
•
Ethernet/RS-232, see
8.1
Operating via the OSD MENU Screen
The OSD superimposes a menu on the Preview screen from which you can control
your VP-747. When the OSD front panel button is on, pressing the MENU button
on the front panel or the Menu key on the infrared remote control transmitter
displays the first OSD screen (or the last used OSD screen), the "Preview Setting"
screen. If the OSD is off, pressing the MENU button on the front panel or the Menu
key on the infrared remote control transmitter does not display the "Menu screen".
In this case, you can navigate via the front panel LCD.
Figure 11
Figure 11: Menu Screen Icons
VP-747 - Operating the VP-747
Section 8.1
Section 8.2
Section 8.4
defines the six interactive icons:
Section 8.3
27
Advertisement
Table of Contents
