Cart Assembly Instructions; Assembling The Grill - Barbeques Galore Turbo select G5STR Owner's Manual

Cart Assembly Instructions

Remove all cart parts, hardware, and Grill Head from
shipping boxes. Raise the Grill Lid and remove all
packed components. Use the parts list to check that
all necessary parts have been included.
Assemble the gas grill on a protective work surface
to avoid scratching grill surfaces. Inspect your grill for
damage as you proceed. Do not assemble or operate
your grill if it appears damaged.
When assembling this grill, we recommend asking for
the assistance of another person when maneuvering
some of the larger, heavier pieces. You will need both
an Adjustable Wrench and Phillips Screw Driver
(not provided) for securing the nuts and screws.

Assembling The Grill

1. Remove cart assembly from shipping box and place
on a flat and level surface such as a garage floor.
Peel back approximately two inches of the protective
PVC film from the Cart Door.
2.
Put the Grill Bowl on the Cart.Slide the Grill Bowl
to align the hole on the Fixing bar.See Figure 1.
Use 4 of the 1/4"x 1" Phillips Head screw.
A.
1/4" x 1" Phillips Head Screw
3.
Attach the Left Side Shelf (with Ice Box) on the
Left Bowl Panel. Use 4 of the 1/4"x 3/4" Phillips
Head screw. See Figure 2A.
B.
1/4" x 3/4" Phillips Head Screw
4.
Attach the Right Side Shelf (with Side Burner) on
the Right Bowl Panel. Use 4 of the 1/4" x 1" Phillips
Head screw. See Figure 2B.
Figure 1
Figure 2A
Figure 2B
11
GRILL BOWL
CART