Outgoing Ip Filtering Setup - Planet ADN-4000 User Manual

3.3.5.1 Outgoing IP Filtering Setup

When Outgoing IP Filtering rules setup being enable on the ROUTER, the various security
functions for the local network will enable at the same time .You can protect the network
against hacker attacks and block individual PC's access to selected services or internet
sites.
Click "Security"-->" IP Filtering"-->" Outgoing" to show the following interface.
By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED
by setting up filters.
Figure: Outgoing IP Filtering Config
Click "Add" to enter the related interface defining the IP filtering rule as follows.
The screen allows you to create a filter rule to identify outgoing IP traffic by specifying a new
filter name and at least one condition below. All of the specified conditions in this filter rule
must be satisfied for the rule to take effect. Click 'Save/Apply' to save and activate the filter.
Figure: Outgoing IP Filtering Add Setup
66