3.3.1.2 Add MER (IPoE) Configuration
In the WAN Service Setup page, click Add to add WAN configuration. This section
describes the procedure for adding ipoe_0_0_32 (Mer mode).
Step 1: Click Add to turn into the following page. (At first, you must add suitable ATM
configuration for this WAN configuration.)
Step 2: Select an ATM Interface, such as atm1/ (0_0_32). Click Next and the following
page appears.
Step 3: In this page, you can modify the WAN service type, Service Description, and
Enable IPv6 for this service. Click Next and the following page appears.
45