Update Software; Save/Reboot - Planet ADN-4000 User Manual

802.11n wireless adsl 2/2+ router
Hide thumbs Also See for ADN-4000:
Table of Contents

Advertisement

3.6.7 Update Software

Click "Update Firmware" to show the following interface. In this interface, you can update the
ROUTER Firmwa
re. Click the "Browse..." button to find the right version file and press
"Update Firmware" to do the update.
Figure: Update Software page
NOTE: Do not turn off your Router during firmware updates. When the update is finishe
d,
the Router will reboot automatically. Do not turn off your Router either befor
e the reboot is
over. You must guarantee the update software is right and accurate. It is stric
tly forbidden to
use oth
er software for updates.
After update software, it is suggested to restore the Router to the
factory defaults and
c
onfigure it again.

3.6.8 Save/Reboot

Click "Save/Reboot" to show the following interface. Click the "Save/Reboot" button to sav
e
and reboot the router.
Figure: Router Save/reboot page
110

Advertisement

Table of Contents
loading

Table of Contents