Table of Contents
Advertisement
3
.4 Wireless
3.4.1 Wireless – Basic
Choose
Wireless > Basic, the following page appears.
Enable Wireless: If you want to make wireless be available, you have to check this
box first. Otherwise, the Hide Access Point SSID, Country, Enable Wireless Gues
Network, and Guest SSID boxes are not displayed.
Hide Access Point: Check this box if you want to hide any access point for y
router, so
a station cannot obtain the SSID through passive scanning.
Clients Isolation: When many clients connect to the same access point, they can
access
each other. If you want to disable the access between clients which connect
the same access point, you can check this box.
Disable WMM Advertise: WMM is short for wi-fi multimedia, which can provide
high-performance multimedia voice and video data transfers.
SSID: For added sec
Channel:
The option of the channel with which your gateway is configur
parameter further specifies
adjust according to nations to adapt to each nation's frequency provision (FCC 1~1
ETSI 1~13, JP
Max Clients: S
Once the client
maximum client
Wireless - Guest/V
function be available, you have to check those boxes in the t
soft
ware version, three virtual access points can be configured.
After setting, click
take effect.
urity, you should change the default SSID to a unique name.
your wireless connection. For
1~14).
pecifies maximum wireless client stat
s exceed the max vlaue, all other client
s is 16.
irtual Access Points: If you want to make Guest/V
Save/Apply to save the basic wireless options and make the change
ions to be enble to link with AP.
s are refused. The value of
94
ed. This
example, the channel will
irtual network
able below. In the current
t
our
1,
Advertisement
Table of Contents
