Add Pppoe Wan Configuration - Planet ADN-4000 User Manual

3.3.2.1 Add PPPoE WAN configuration

In the WAN Service Setup page, click Add to add WAN configuration. This section
describes the procedure for adding pppoe_0_0_32 (PPPoE mode).
Step 1: Click Add to turn into the following page. (At first, you must add suitable ATM
configuration for this WAN configuration.) In this page, you can select ATM
Interface .
Step 2: After proper selection, click Next, and the following page appears.
Step 3: In this page, select WAN service type PPP over Ethernet(PPPoE). Click Next,
and the following page appears.
42