Eth Interface; Wan Configuration - Planet ADN-4000 User Manual

802.11n wireless adsl 2/2+ router

Hide thumbs Also See for ADN-4000:

Table of Contents

3.3.1.2 ETH Interface

Choose Advanced Setup > Layer2 Interface > ETH Interface, and the following page

appears. In this page, you can add or remove to configure ETH WAN Interfaces.

Click Add and the following page appears.

In this page, you can select a ETH port, such as eth0/ENET4, and select connection

mode. Click Apply/Save to save configuration.

Choose Advance Setup > WAN Service, and the following page appears.

WAN configuration

Figure 1

Click Add, it turns into the following page. You can configure PPPoE, PPPoA, Mer (IPoE),

Bridge, IPoA WAN configuration.

Note: ETH and PTM/ATM sevice can not be coexist.

Choose Remove check box, click Remove to delete the WAN configuration.

Table of Contents