Table of Contents
Advertisement
3.1.3 WAN Setup Summary
When In WAN setup summary phase, the property of the PVC added can view:
VPI/VCI
Connection Type:
Service Name:
Service Category:
IP Address:
Service State:
NAT
Firewall
IGMP
QoS
Click "Save/Reboot" to save these settings. And you can click "Back" to make any
modifications. After you click "Save/Reboot", it shows the following message.
NOTE: You need to reboot to activate this WAN interface and further configure services
over this interface，and it will take about two minutes to done with it.
Figure: WAN setup summary
Figure: DSL Router Reboot
28
Advertisement
Table of Contents
