Planet ADN-4000 User Manual page 70

802.11n wireless adsl 2/2+ router

Hide thumbs Also See for ADN-4000:

Table of Contents

Filter Name: Enter the name of incoming filter rule

Protocol: Select one among TCP/UDP TCP UDP or ICMP protocols

Source IP address: Enter an IP address. When you have set IP address, the incoming

packet (protocol selected packet) will allow.

Source subnet mask:

Source port : UPD/TCP source port or a range of ports

Destination IP address: Destination IP (default no set)

Destination subnet mask:

Destination port : UPD/TCP destination port or a range of ports

Wan interfaces: You can select WAN interfaces and PVC

There is an example to introduce how to configure the incoming IP Filtering:

Request:

I need to permit a PC whose IP address is 10.10.10.10. All Incoming TCP/UDP packet

traffic from that PC(10.10.10.10) is allowed.

Block all IP traffic from other PC .

Figure: incoming IP filer application

Table of Contents