Planet ADN-4000 User Manual page 11

802.11n wireless adsl 2/2+ router
Hide thumbs Also See for ADN-4000:
Table of Contents

Advertisement

LED definition
LED
State
Off
Green
PWR
Red
Blink Red
Off
Link
Blink Green The DSL line is training.
Green
Off
Data
Green
Red
Off
LAN 1-4
Green
Blink Green Data is passing through Ethernet port.
Off
WLAN
Green
Blink Green Data is passing through wireless.
Off
WPS
Blink Green WPS service tries to establish.
Rear Panel
Description
The power is off.
The power is on and operating normally.
The power is self-testing.
The device enters the console mode of the boot loader.
The self-testing fails if the LED is always RED.
Upgrading software.
No signal is detected.
The DSL line connection is established.
No Internet connection.
The users can access the Internet.
Device attempts to become IP connected but fails.
No Ethernet signal is detected.
Ethernet interface is ready to work.
No radio signal is detected.
WLAN interface is ready to work
WPS service is not during using, or WPS is setup successfully.
11

Advertisement

Table of Contents
loading

Table of Contents