Add Ipoa Configuration - Planet ADN-4000 User Manual

3.3.1.4 Add IPoA Configuration

This section describes the procedure for adding ipoa_0_0_35 (IPoA mode).
Step 1: You need to open the Layer2 Interface > ATM Interface page to add a PVC for
IPoA mode. Click Add and the following page appears.
Step 2: Select the DSL link type to IPoA, the Encapsulation Mode to
LLC/SNAP-ROUTING (according to the uplink equipment). Click Apply/Save, and
the following page appears.
Step 3: Return to the WAN Service page, and click Add. The following page appears.
51