Step 5
: In this page, select a preferred WAN interfac
Click Next,
Step 6
: In this page, you can get DNS server information from the selected WAN interface
or enter static DNS server IP addresses. If only a single PVC with IPoA or static
MER protocol is configured, you must e
Next
, and the following page appears.
Step 7
: In this page, it shows all the configurations. Click Apply/Save to all the
configurations,
modifications.
and the following page appears.
and the following page appears. Click Back to make any
e as the system default gateway.
nter static DNS server IP addresses. Click
44