Manual Installation - Network Setup - Planet WNRT-617G Quick Installation Manual

STEP 2: Follow the figure below to connect network devices. It depends on your
demand to connect wired DSL/Cable connection, or 3G/4G USB modem,
or both (backup for each other).
Power
Power Adapter
RJ-11
Phone Jack
4. Manual Installation – Network Setup
A computer with the UTP cable connected to the Wireless Router is required for the
first-time configuration.
STEP : Set your computer to get an IP address from the Wireless Router (Based
on Windows 7):
1. Click "Start" button located at lower-left corner of you computer.
2. Click "Control Panel".
3. Double click "Network and Sharing Center" icon.
4. Click "Change adapter settings".
5. Double click "Local Area Connection".
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Prop-
erties".
ON/OFF
POWER
RJ-45
DSL/Cable Modem
1-3
3G/4G USB Modem
WAN 4 3 2 1
RJ-45
USB
PC/Laptop