Configuring Ntp Server - HIKVISION DS-8100HFI-ST Series User Manual

User Manual of DS-8100HFI-ST Series DVR
5. Click the Apply button to save and exit the interface.

9.2.3 Configuring NTP Server

Purpose:
A Network Time Protocol (NTP) Server can be configured on your DVR to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the NTP tab to enter the NTP Settings interface, as shown in Figure 9.9.
3. Check the Enable NTP checkbox to enable this feature.
4. Configure the following NTP settings:
Figure 9.8 NO-IP Settings Interface
Figure 9.9 NTP Settings Interface
141