Table of Contents
Advertisement
User Manual of DS-8100HFI-ST Series DVR
2) Select the camera (s) to be configured with the same OSD settings. You can also click the checkbox of
Analog to select all cameras.
3) Click the OK button to finish the Copy settings and back to the OSD Configuration interface.
8.
Click the Apply button to apply the settings.
11.2 Configuring Privacy Mask
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator.
Steps:
1.
Enter the Privacy Mask Settings interface.
Menu > Camera > Privacy Mask
2.
Select the camera to set privacy mask.
3.
Click the checkbox of Enable Privacy Mask to enable this feature.
4.
Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
Note:
Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.
5.
The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
Figure 11.3 Privacy Mask Settings Interface
172
Advertisement
Table of Contents
